:
:
:
PVC U 12x5000 mm SDR 13,5 transparent
High durability and chemical resistance are two of the most important properties of this material. It is resistant to moisture, chemicals, corrosion, and wear, and retains its properties even under stress and in demanding environments. This material is also highly resistant to many chemicals, making it suitable for use in industrial and chemical applications. It is an economical alternative compared to many other plastic materials. It is often used in plumbing systems and window profiles. If you need a material that can withstand tough conditions, this may be the right choice. Contact us if you want to know more about this material and how it can be used in your specific application.
Technical Specifications
Color
Transparent
Length
5000 mm
Material
Produktens basmaterial
Outer Diameter
12 mm
| Property | Value | Unit | Test standard |
|---|---|---|---|
| Density & Weight | |||
| Density | 1.53 | g/cm³ | ASTM D792 |
| Moisture Absorption | |||
| Water absorption to saturation | 0.5 | % | ASTM D570 |
| Water Absorption to Saturation | 0.5 | % | ASTM D570 |
| Tensile Properties | |||
| Tensile Strength | 48.8 | MPa | ASTM D638 |
| Modulus of elasticity (tensile) | 2669 | MPa | ASTM D638 |
| Breakdown Voltage | 40 | MPa | ISO 527 |
| Break Elongation | 14 | % | ISO 527 |
| Flexural Properties | |||
| Flexural Strength | 73.1 | MPa | ASTM D790 |
| Impact Resistance | |||
| Notched impact strength (Charpy) | 4 | kJ/m² | ISO 179 |
| Impact Resistance (Charpy) | 550 | kJ/m² | DIN EN ISO 8256 |
| Hardness | |||
| Hardness Shore D | 85 | ° Shore D | ASTM D2240 |
| Ball pressure hardness | 100 | MPa | ISO 2039 |
| Temperature Limits | |||
| Melting point | 189.2 | °C | ASTM D3418 |
| Maximal operating temperature (short-term) | 93.3 | °C | UL 746B |
| Maximum Operating Temperature | 60 | °C | |
| Minimum temperature | -15 | °C | UL 746B |
| Heat deflection temperature (HDT/A) | 106.7 | °C | ASTM D648 |
| Vicat softening temperature (VST/B/50) | 75 | °C | ISO 306 |
| Thermal Conductivity | |||
| Thermal Conductivity | 0.14 | W/(m·K) | ISO 22007-4 |
| Thermal Expansion | |||
| Thermal Expansion Coefficient | 1.03 | 10⁻⁴/K | ASTM D696 |
| Insulation Properties | |||
| Dielectric Strength | 40 | kV/mm | IEC 60243-1 |
| Volume Resistivity | 10¹⁵ | Ω·cm | DIN EN 62631-3-1 |
| Dielectric Constant (1 MHz) | 3.1 | - | IEC 60250 |
| Dielectric Constant (100 Hz) | 3.2 | - | IEC 60250 |
| Dielectric loss factor (1 MHz) | 0.0 | - | IEC 60250 |
| Static spread | |||
| Surface Resistivity | 10¹³ | Ω | DIN EN 62631-3-2 |
| Comparative Tracking Index (CTI) | 600 | V | IEC 60112 |
Identification
| Product name | Polyvinylklorid (PVC) |
|---|---|
| Classification | not_classified |
| Supplier | ARC Gruppen AB // PlastShop.se |
| Chemical characterization | Polyvinylklorid (PVC-U), CAS 9002-86-2 |
| Physical/chemical hazards | Brandfarlig.. Damm kan orsaka mekanisk irritation. |
|---|---|
| Health hazards | Brandfarlig.. Damm kan orsaka mekanisk irritation. |
| Environmental hazards | Materialet är inte skadligt för miljön, men är inte biologiskt nedbrytbart. |
Physical properties
| Fysisk form | Fast, ogenomskinlig termoplast. Grå, vit eller svart. |
|---|---|
| Färg | Fast, ogenomskinlig termoplast. Grå, vit eller svart. |
| Odour | Lätt, produktspecifik |
| Melting point | 100-260°C (beroende på mjukgörare) |
|---|---|
| Auto-ignition | ca 455°C |
| Decomposition temp. | >200 °C (HCl-frigöring) |
| Solubility | Olöslig i vatten |
Handling and storage
| Handling | Vid bearbetning av halvfabrikatet bör spån sugas bort för att undvika halkskador. |
|---|---|
| Storage | Förvara inert produkt torrt och svalt. Håll lager- och arbetsutrymmen välventilerade. Håll borta från öppen låga, värmekälla eller antändning. På grund av risken för kollaps, stapla inte mer än två pallar ovanpå varandra. Pallar ska inte staplas ovanpå varandra längs gångar. |
Personal protection
| Gloves | Skyddshandskar vid kontakt med varmt material. |
|---|---|
| Eyes | Skyddsglasögon eller visir vid bearbetning. |
| Respiratory | Adekvat ventilering vid arbetsplatsen krävs. |
Stability and reactivity
| Förhållanden | Temperaturer över smältpunkten. |
|---|---|
| Materials to avoid | Starka oxidanter. |
| Decomposition products | Saltsyra (HCl), koldioxid, kolmonoxid. |
Transport information
Inte klassificerad som farligt gods.
Legal specifications
Produkten kräver ingen varningsetikett i enlighet med EU-direktiv.
Resistant
Partially resistant
Not resistant
| Chemical | Concentration | Resist. |
|---|---|---|
| 1,4-Dioxane | 100% | |
| 2-Hydroxypropionic acid (lactic acid) | 90% | |
| Acetic acid | 100% | |
| Acetone | 100% | |
| Ammonia | conc. | |
| Ammonium chloride | — | |
| Amyl alcohol | — | |
| Apple juice | — | |
| Benzene | — | |
| Bleaching solution | 12.5 cl | |
| Boric acid | 100% | |
| Brake fluid | — | |
| Butyl acetate | — | |
| Calcium chloride | — | |
| Carbon disulphide | 100% | |
| Carbon tetrachloride | — | |
| Chlorine (gas) | 100% | |
| Chlorobenzene | 100% | |
| Chloroform | — | |
| Citric acid | 10% | |
| Cresol | — | |
| Cyclohexanone | 100% | |
| Cyclohexene | 100% | |
| Diesel | — | |
| Diethylene oxide | — | |
| Ethyl acetate | 100% | |
| Ethyl alcohol (ethanol) | 96% | |
| Ethylene chloride | 100% | |
| Food oil | — | |
| Formaldehyde (aqueous) | 40% | |
| Formic acid | 10% | |
| Frost protection agent | — | |
| Fuel (aromatic free) | — | |
| Fuel oil | — | |
| Glycerine | 100% | |
| Glycol | 100% | |
| Heptane | 100% | |
| Hydrochloric acid | 10% | |
| Hydrochloric acid (concentrated) | conc. | |
| Hydrofluoric acid | 40% | |
| Hydrogen peroxide | 10% | |
| Hydrogen sulfide (aqueous) | — | |
| Isopropyl alcohol | 100% | |
| Linseed oil | — | |
| Mercurochrome | — | |
| Methyl alcohol (methanol) | 100% | |
| Methyl ethyl ketone (MEK) | 100% | |
| Methylene chloride | 100% | |
| Milk | — | |
| Mineral oils (aromatic free) | — | |
| Nitric acid | 50% | |
| Nitric acid | 10% | |
| Nitrobenzene | — | |
| Oxalic acid | — | |
| Ozone (gas) | ≤ 0.5 ppm | |
| Paraffin oil | 100% | |
| Perchloroethylene | — | |
| Petroleum | 100% | |
| Petroleum ether | 100% | |
| Phenol (aqueous) | ca. 9% | |
| Phosphoric acid | 50% | |
| Potassium hydroxide solution | 50% | |
| Premium fuel | — | |
| Propyl alcohol | — | |
| Pyridine | — | |
| Silicone oil | — | |
| Sodium carbonate (aqueous) | — | |
| Sodium chloride (aqueous) | — | |
| Sodium hydrogen sulfite | — | |
| Sodium hydroxide solution (caustic soda) | 15% | |
| Sodium hydroxide solution (caustic soda) | 60% | |
| Sodium nitrate (aqueous) | — | |
| Sodium thiosulfate | — | |
| Sulphuric acid | 96% | |
| Tetrahydrofuran (THF) | 100% | |
| Toluene | 100% | |
| Transformer oil | — | |
| Trichloroethylene | 100% | |
| Vinegar (standard) | 5 - 10% | |
| Water | — | |
| Xylene | — |
To install this Web App in your iPhone/iPad press 
and then Add to Home Screen.
